• spe_5

    Finish

    Glossy & Matt
  • spe_5

    Colour

    white and any light color
  • spe_5

    Specific gravity

    1.25g/lit [±0.025]
  • spe_5

    Weight Solids

    64% [±2]
  • spe_5

    Flash Point

    21oC
  • USE
  • SURFACE PREPARATION
  • PRODUCT PREPARATION
  • APPLICATION METHODS
  • STORAGE AND SHELF LIFE
  • SAFETY PRECAUTION

For Interior use, such as finish product on raw piece of glass.

Remove any dust from the glass by using thinner or other washing material, and after apply directly the paint on the glass, no need for primer.

Catalyst by weight by volume with hardener 20% 20% CP040
Accelerator 2% 2% CP0100
Additive Not necessary in normal condition.
Pot Life 6hrs. at 25°C
Dilution
Spraying: Dilute with PU thinner TP292 at 20-30%.
In summer period with hot and humid climate, it is necessary to add 5 % of PU retardant thinner TP222.

Spray gun: Use spray gun with 1.8-2 mm. nozzles at 3-4 atm/bar. Air mix and airless pumps may also be used. In this last case do preliminary test. For spray application, reduce at 20-30% with PU thinner.
Depends on the finishes required but in general an appropriate rate is 130 gr / sq. m. The number of coats shouldn’t exceed the 2 coats

Available in USG, 5USG.
Store in a cool and well ventilated place. Keep away from direct sunlight. Maximum 18 months in unopened container, stored in a cool and dry condition at 25°C.

This material is not flammable.
Use only in well ventilated areas. In case of insufficient ventilation during application wear suitable respiratory equipment. Do not breathe vapor / spray. In case of contact with eyes, rinse immediately with plenty of sweet water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a recognized skin cleanser.